| Customization: | Available |
|---|---|
| Function: | Reversing |
| Installation: | Plate |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Characteristics
- Direct acting solenoid operated directional spool valve
- Mounting surface according to DIN24 340 Type A
ISO 4401 and CETOP-RP 121H
- DC or AC electromagnet with removable coil
(Can be connected to AC voltage using a rectifier)
- The electromagnet coil can be rotated 90°
- When replacing the coil, there is no need to open the pressure-resistant sealed cavity
- Optional switching time adjustment function
WE10-L5X series directional valve is an electromagnetic reversing slide valve with the function of adjusting the switching time, which is used to control the opening, stopping and flow direction of the oil.
The directional control valve mainly comprises a valve body (1), one or two electromagnets (2), a control valve core (3) and a return spring (4).
In the de-energized state, the control valve core (3) is held in the middle or initial position (except for the impulse valve) by the return spring (4). The control valve core (3) is operated by the wet solenoid (2).
In order to ensure satisfactory operation, it is important that the pressure chamber of the solenoid is filled with oil.
The force of the solenoid (2) acts on the control valve core (3) through the push rod (5), pushing it from the initial position to the required position, which allows the oil to flow freely from P to A, B to T or P to B, A to T.
When the solenoid (2) is de-energized, the control valve core (3) is pushed to the initial position by the return spring (4). The manual emergency operation (6) can control the movement of the valve core (3) when the solenoid is not energized.
Effect on switching time (only DC solenoids can be used)
When using a 5-chamber directional valve of the WE10-L5X series, the switching time can be extended to 100 ms or even longer by installing a selected "C" type throttling screw (7) or an "AO." throttling orifice (8). The switching time is affected by factors such as pressure, flow and oil viscosity, depending on the installation situation. When the valve core (3) is in the middle or initial position, the spring chambers at both ends are filled with oil. During the switching process of the valve core, the oil in the spring chamber will flow through the connecting channel (9) to enable the valve core to switch smoothly. By restricting the connecting channel (9) (such as screwing in a throttling screw or throttling orifice to reduce the flow area), the switching time can be adjusted according to actual needs.
Model WE10.L5X/O...(only for functions A,C,D)
This valve is a two-position valve with double electromagnets. When the power is off, the valve core has no fixed position.
Model WE10.L5X/OF... (Pulse Slide Valve) (only for functions A, C and D)
This valve is a two-position valve with dual electromagnets and a positioner. It can be kept in any position without the electromagnet being continuously energized.
Insert restrictor (type 4WE10.L5X/.../B...)
When it is necessary to limit the flow into the valve, a throttle can be installed at the P port.
| Type | NG6-L6X | NG10-L3X | NG10-L5X | |
| Mounting position | selectable | |||
| Environmental temperatureºC | -30 ~ +50 (Nitrile Rubber Seal) | |||
| -20 ~ +50 (Fluorine Rubber Seal) | ||||
| Weight | valve kg | / | / | / |
| kg(G115/01A) | / | / | / | |
| Single Solenoid Valve kg | 1.5 | Individual wiring:4.3(DC),3.5(AC) | 4.3(DC) | |
| Centralized wiring:4.4(DC),3.6(AC) | ||||
| Double Solenoid Valve kg | 2.0 | Individual wiring:5.9(DC),4.3(AC) | 5.9(DC) | |
| Centralized wiring:6.0(DC),4.4(AC) | ||||
| Maximum working pressure at the oil port | oil port A,B,P bar | 350 | 315 | 350 |
| oil port T bar | 210(DC),160(AC) | 210(DC) | ||
| Maximum flow rate L/min |
80(DC) 60(AC) |
120 | 150 | |
| Flow area (at median) | V Typemm2 | / | 11(A/B → T);10.3(P → A/B) | / |
| Q Typemm2 | Approx. 6% of nominal cross-sectional area | 2.5(A/B → T) | / | |
| W Typemm2 | Approx. 3% of nominal cross-sectional area | 5.5(A/B → T) | / | |
| Working medium | Mineral oil - for NBR or Fluorine rubber seals | Mineral oil (HL, HLP) to DIN 51 524 - for NBR or Fluorine rubber seals | ||
| Phosphate ester - for fluoroelastomer seals | ||||
| Working medium temperature rangeºC | -30~+80(Nitrile Rubber Seal) | |||
| -20~+80(Fluorine rubber seals) | ||||
| Viscosity range mm2/s | 2.8~500 | |||
| Oil contamination degree | The maximum contamination level of the fluid is according to NAS1638 Class 9 and ISO4406 Class 20/18/15. | |||
Hebei Ding'an Hydraulic Machinery Co., Ltd. is a professional company integrating the research, production and sales of hydraulic valves. It is an ISO9001:2000 quality management system certified enterprise. The company currently has fixed assets of more than 10 million yuan, covers an area of 16,000 square meters, has strong technical force, and has more than ten years of experience in the development and production of hydraulic valves. It can quickly and high-quality develop various mining and engineering machinery hydraulic valves according to customer requirements.
){kind=link}