Dingan We 6-L6X Type Solenoid Operated Directional Valve Hydraulic Valve

• Customization: Available
• Function: Reversing
• Installation: Plate
• Model NO.: WE 6-L6X Type
• Type: Directly Operated Type
• Pressure: Depending on Model
• Structure: Depending on Model
• Dimension(L*W*H): Depending on Model
• Maximum Pressure: 350 Bar
• Maximum Flow Rate: 80 L/Min
• Material: Rubber Cast Iron
• Color: Blue
• Temperature of Media: Normal Temperature
• Standard or Nonstandard: Standard
• After-Sales Service Provided: Online Support
• Transport Package: Strong Wooden Carton
• Specification: Depending on Model
• Trademark: Dingan
• Origin: China Hebei Xingtai Ningjin
• HS Code: 8481901000
• Production Capacity: 60000 Piece/Pieces Per Month
• Package Size: 10.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 10.000kg

Product Description

Product Characteristics
Directional spool valve, solenoid operated, direct acting
Mounting surface according to DIN24 340A
ISO 4401 and CETOP-RP 121H
DC or AC electromagnet with removable coil
The coil can be replaced without adding oil
Electrical connections as single or center connections

WE type directional control valve is a solenoid operated reversing slide valve used to control the opening and closing and flow direction of oil.
The directional control valve mainly comprises a valve body (1), one or two electromagnets (2), a control valve core (3) and one or two return springs (4).
In the de-energized state, the control valve core (3) is held in the middle or initial position (except for the impulse valve) by the return spring (4). The control valve core (3) is operated by the wet solenoid (2).
In order to ensure satisfactory operation, it is important that the pressure chamber of the solenoid is filled with oil.
The force of the solenoid (2) acts on the control valve core (3) through the push rod (5), pushing it from the initial position to the required position, which allows the oil to flow freely from P to A, B to T or P to B, A to T.
When the solenoid (2) is de-energized, the control valve core (3) is pushed to the initial position by the return spring (4).
The manual emergency operation (6) can control the movement of the valve core (3) when the electromagnet is not energized.

WE6...L6X/O... type (only for functions A, C, D)
This valve is a two-position valve with double electromagnets. When the power is off, the valve core has no fixed position.

WE6...L6X/OF... type, pulse valve (only for functions A, C, D)
This valve is a two-position valve with dual electromagnets and a positioner. It can be kept in any position without the electromagnet being continuously energized.

Insert restrictor (WE6...L6X/.../B... type)
When it is necessary to limit the flow into the valve, a throttle can be installed at the P port.

 

Technical data

Type		NG6-L6X	NG10-L3X	NG10-L5X
Mounting position		selectable
Environmental temperatureºC		-30 ~ +50 (Nitrile Rubber Seal)
		-20 ~ +50 (Fluorine Rubber Seal)
Weight	valve kg	/	/	/
	kg(G115/01A)	/	/	/
	Single Solenoid Valve kg	1.5	Individual wiring:4.3(DC),3.5(AC)	4.3(DC)
			Centralized wiring:4.4(DC),3.6(AC)
	Double Solenoid Valve kg	2.0	Individual wiring:5.9(DC),4.3(AC)	5.9(DC)
			Centralized wiring:6.0(DC),4.4(AC)
Maximum working pressure at the oil port	oil port A,B,P bar	350	315	350
	oil port T bar	210(DC),160(AC)		210(DC)
Maximum flow rate L/min		80(DC) 60(AC)	120	150
Flow area (at median)	V Typemm^2	/	11(A/B → T);10.3(P → A/B)	/
	Q Typemm^2	Approx. 6% of nominal cross-sectional area	2.5(A/B → T)	/
	W Typemm^2	Approx. 3% of nominal cross-sectional area	5.5(A/B → T)	/
Working medium		Mineral oil - for NBR or Fluorine rubber seals		Mineral oil (HL, HLP) to DIN 51 524 - for NBR or Fluorine rubber seals
		Phosphate ester - for fluoroelastomer seals
Working medium temperature rangeºC		-30~+80(Nitrile Rubber Seal)
		-20~+80(Fluorine rubber seals)
Viscosity range mm^2/s		2.8~500
Oil contamination degree		The maximum contamination level of the fluid is according to NAS1638 Class 9 and ISO4406 Class 20/18/15.

    Hebei Ding'an Hydraulic Machinery Co., Ltd. is a professional company integrating the research, production and sales of hydraulic valves. It is an ISO9001:2000 quality management system certified enterprise. The company currently has fixed assets of more than 10 million yuan, covers an area of 16,000 square meters, has strong technical force, and has more than ten years of experience in the development and production of hydraulic valves. It can quickly and high-quality develop various mining and engineering machinery hydraulic valves according to customer requirements.